The SOFTFLOW puck screen delivers exceptionally measured flow, all the time. 

What Sets It Apart:
The key difference, compared to other puck screens, is that SOFTFLOW was not conceived as a passive filter, but rather, to actively leverage pressure during the extraction process. 

Its exterior layers were designed to require a marginal degree of pressure in order for water to pass through – that is to say, at very-low hydrostatic pressures (below 0.2bar), they do not facilitate water flow. 

So when you begin your pull, a thin film of water will instantly build above the top layer before it passes through. Then, as water permeates the middle layer, it is compelled once again to coalesce and re-attain this marginal pressure, before it can pass through the bottom layer.

Sequentially, this works to equalise the pressure and distribution across each layer, to deliver perfectly even flow across the entire surface area of your puck. (▶︎2:47) 

With SOFTFLOW, you are assured of repeatable consistency.

The Full Picture: 
If a picture paints a thousand words, i'm hoping video will do even better! For a closer look at how SOFTFLOW works, alongside footage of flow dynamic tests compared to other puck screens, please check out our youtube video:

Attributes:
• Immaculate Flow Dynamics, underpinned by:
   – Uniform Distribution 
   – Equalised Flow Rates 
• Easy to clean

Composition:
• Top Layer: 15,318 holes @ 150µm, 0.3mm
• Middle Layer: 321 chambers, 0.7mm
• Bottom Layer: 15,318 holes @ 150µm, 0.3mm

Specifications: 
• Stainless Steel
• 58.50mm (⌀)
• 1.3mm (t)   
• 32g (W)